Breathing Room

Finally, the heat wave broke. I went in this morning to make adjustments to the porch hive which was out of space again. First, an observation. Some of the bees were clustered around the entrance trying to keep warm. I think this happens when there is not enough space inside and also perhaps when it is too warm in the hive. They'll start flying when it warms up.
There were bees on the bottom screen, so they are escaping again. I brushed them off and out the window. They were groggy this morning, so a lot went in a container and I dumped it out the window. Then I closed the hatch on the bottom until I can add another screen. I didn't suit up - they were not aggressive.
Next, I did suit and dealt with the feeder area which has become a morgue. The bottom was littered with dead bees. The live ones flew out and I swept the dead ones into the pan and out the window.
Finally, I was ready to add more bars - I decided on 4. I pried the end bar loose. Not easy, because, in addition to being sealed with propolis, there was a lot of comb. When they build comb for honey, they get sloppy and the comb goes on an angle, crosses bars, and is otherwise not uniform like it is with brood comb. Very few came out. I put in the 4 bars and returned the end bar with almost zero disturbance. What I did find was that they were filling the comb with honey. I don't know what the proporation might be between brood and honey, but my guess is that there could be 15 bars of honey stored! Could be a harvest this year, although at least they shouldn't starve in the winter.
The yard hive may be a little over 1/2 the size of the porch hive. I think it's having trouble with lack of sun and too much moisture. Whatever the reason, the porch location seems far better than the yard.

That's a lotta bees...

Just doing a quick update. The porch hive continues to grow. They are really good at producing more bees. The 3 new bars are getting close to full. Bees are clustering in the feeding and starting to move into the open space at back again. I may have to give them more bars to avoid swarming. Meanwhile, bees are oozing out through the bottom screen. Either they are expanding existing small holes or just pushing through. In any case, the number on the porch was increasing when J came home yesterday, so she took the screen out, put the cat in and shut the back door. Bees were on the bottom screen so I suited up, swept them off and closed the bottom cover temporarily. Since there isn't time to add another piece of screen, I used masking tape to cover the hole(s). The temperature is going close to 100 today and tomorrow, so I wanted the screen open. The tape is working for now.
Meanwhile, the back hive is smaller and fairly peaceful. I felt sorry for them so I fed them several days in a row. They finished a feeder every day. It is damper and shadier down there, so they are not as active. You can see the difference between the two hives.
Stay cool out there. For those of you in California, that's no problem. For us, it sucks. We had Cal. weather for a long while, but now the temp is going through the roof. Is this how it is in Denver?

Catching Up

Still learning how to manage a blog. Looks like it should be updated every day or two to make a habit of it.  We'll see.
It's been over 2 weeks since the last update (wax entry doesn't count). We spent a week in California, LA area, at the wedding of Lauren and Brian in the San Bernadino mountains. Weather was cool and dry, even near the Pacific at Santa Barbara and Laguna Beach. We came back to the same weather which is continuing, except for last Sunday which got to 94. Of course that's the day I played golf.
Anyway, the bees easily survived the trip with no feeding. The porch hive was packed with bees. Many had squeezed under the end bar because the weight of the others on the screen created a small gap. The feeder was also full of bees. Quite a few were escaping onto the porch and we spent some time trying to find the escape route. Turns out it was because they got past the end bar - that space just had pieces of cardboard covering it and there was a gap. Also, the lid wasn't meant to be really tight. Every time I opened the screen to let the escapees out, more showed up. Not good.
I tried cutting some wood to cover the space, but it was warped, so they still got out. Then I decided they just needed more space so I had to add bars. This meant moving the end bar and flipping the 3 extra bars I had into the main space.
For this, I got fully suited and shut the door to the house, of course. As soon as I pried the bar loose, they came flying and crawling out - very exciting. I managed to get the new bars in, but there were so many bees everywhere that there were a number of casualties. It's not always possible to tinker with the hive without killing some bees. There are always some wandering where you don't want them.
So the hive was re-established with more room. The porch emptied, with a little help from me. Note that if you wait until it's dark and cool, the bees just sit around in a group. I could brush them into a pan and dump them outside.
I also got some more wood and cut a lot of new bars. I replaced the warped wood with those so the there are no escape routes. After a few days, the bees in the space outside the end bar moved back in, as did many of the bees in the feeder. They have been busy ever since building more comb. The observation window makes it easy to see them as they string across an expanse attached leg to leg - weird, but it's one of the things they do.
I finally went in to remove the empty feeder this morning, mostly because dead bees were accumulating. The bees still appear to be confused by this space. It's outside the hive so they think it's an exit so they try to take the trash out that way. Eventually, they drop the dead bees out there.  When I opened it, they just flew right out the window, some carrying the trash. I removed the feeder, which was stuck with sugar water, so I had to jostle it. I also removed the corpses.  I'll watch now to see if they run out of space again. I'm reluctant to add more bars because the existing comb seems to have plenty of open cells. The bees seem to love building comb, maybe more than storing honey.
This is getting long, so I'll make a separate post for the outside hive.

Making Wax

I had some wax left over from last year's hive, even after I added bars of comb to the new hives, so I thought I'd try processing for wax. there are lots of videos on YouTube. so I followed one of those. I had an old Crock Pot I wasn't using, so I pressed it into service. Once you process wax with it, you can't use it for anythinig else - that's what the videos say and it's true.

I addeded as much comb as would fit and as much water as it would take and started heating. After an hour, everything was melted. The videos suggested a kitchen strainer, but I used a piece of window screen as a strainer as you can see below. There is a lot of gunk, some call it "slumgum" that rises to the top and strains out. It's all organic so it went in the compost pile. I don't have pics of that, but it really is gunk - dead bees and other junk. This simple method works because the wax floats above the water.

When everything cooled in the bucket, I pulled out the layer of wax and dumped the dirty water below it. That was the first step.  I put the wax pieces back in the crock pot (pic below) and added some more water, but not a lot for a second screening.


After melting that, I put it through multiple layers of cheese cloth. the result is below. You lose some wax in the process, but get the remaining dirty bits out. This is not cost effective for small amounts of wax, but would work with more.

I used an old skillet instead of bucket since there wasn't that much to process. This is what it looks like as it starts to solidify. It cools fairly quickly.

This is the resulting wax, pretty clean. It came out as a circle because of the skillet shape (duh). It's about 10" across and 1/8" thick - not much, maybe a small candle. Still, it is nearly pure beeswax. 

I didn't expect it to be that yellow - church candles are supposed to be pure beeswax and they are white. Jeanne has old church candles; the pic below shows the difference.  Turns out the manufacturer only guarantees at least 51% beeswax.  I haven't looked for information on what the color should be - so I don't know if it varies or needs more filtering or what.

So that's the beeswax adventure. It will be a while before I try again. It depends on a supply of comb. I'll save whatever I find until I have enough. It will have to be kept cold, though. I left the other too long and wax moths started to eat it. I did enjoy killing the grubs, some of which were in the slum gum.

Approaching 6 weeks

6 weeks is the recommended time to stop feeding - that's Friday. However, they seem to be feeding faster than ever. Either there's nothing out there or they're taking the easy way out. Fed both on the 28th, then yesterday, the 30th, and this morning, the 31st. In every case except the outside hive this morning, they were bone dry. The outside had a little left. They won't get anything until next Wednesday or Thursday, so we'll see. They seem to have some cells with honey in them, so that's something to work with. I can't tell how much, though, because I can only see the edge of the comb. They continue to build a lot of comb even though they have plenty of room on the starter comb. Guess they can't help themselves. The available space is within a few bars of being full.

Day 34

I just fed both hives again! Hard to tell whether they are getting lazy or really need it. That's 4 days for the porch and 7 days for the yard. Both feeders were bone dry. (Where does that expression come from?) I waited til this morning for the yard because they were too active yesterday. The feeder area was empty so it was easy. I did the porch an hour ago and the area was full of bees. They didn't seem to mind. I removed a few dead bees - some of them still think this is an exit. I tossed the feeder out the window again with bees on it. Others just flew out. There was only one in the porch and I got it to crawl onto the brush and flicked it out the window. Colum Ceil (the fat old cat) was on the floor snoozing and wasn't bothered at all.

They continue to chain and build more wax. No luck yet seeing the queen or emerging new bees, but I'll keep looking. There are a lot more bees in both hives, so the numbers must be increasing. Even though they are using the feeders heavily, there is a lot of foraging.

Sugar usage calculates to 15 lbs so far.

Day 30

Ok, so I can't do arithmetic anymore. Day 22 was actually day 24. Fed the porch again yesterday (7th time) and yard on the 17th (6th time). Feeding is getting easy. I put on the protective gear but didn't need it. I took the screen out, took the empty feeder out, with a number of bees on it, shook them out the window and only had one left inside. It crawled on the glove and I moved her outside. Very easy.

Both hives are up to about 10 full bars of wax - much easier given that they started with the old bars. Lots of brood and honey cells. I can just see some from the edge. The queen must be on the window side sometime, so I hope to see her some day.

June 2 is the 6 week mark where they should not need any more feeding.